Merchandise Description

Solution Description
32mm 80 RPM Brushed DC Planetary 12v Equipment Motor 25kg Specifications:

Note : It’s just the normal technological info for you reference, The specification these kinds of as voltage, speed, torque, shaft can tailored.

A lot more Details:

Rated Voltage:    12V/24V

No Load Pace:  2-3000RPM

Load Torque:       5-25kgf.cm

Reduction Ratio: 1:3.3-1:2142

Output Energy:     1-10W

Motor Diameter:     37.3mm

Gearbox Diameter:  32mm

Motor Duration:         57.5mm

Gearbox Size:     20.7-43.8mm

Shaft Type:               D-reduce, round or keyway

Associated Items

Firm Profile
HangZhou CZPT Co. Ltd is a manufacturer and exporter of a variety of of motors with over 10 years knowledge.
Our merchandise ranges consist of:
1) DC Brush motor: 6-130mm diameter, .01-1000W output electrical power
2) DC Spur Equipment Motor: 12-110mm diameter, .1-300W output power
3) DC Planeary Equipment Motor: 10-82mm diameter, .1-100W output power 
four) Brushless DC Motor: 28-110mm, 5-1500W output power 
5) Stepper Motor: NEMA 08 to NEMA 43, Can with gearbox and direct screw
6) Servo Motor: 42mm to 130mm diameter, fifty-4000w 
seven) AC Gear Motor: forty nine to 100mm diameter, 6-140 output power 

 Production Equipment

Certifications

Client Check out and Fair 

FAQ

Q: What’s your main products?
A:We at present produce Brushed Dc Motors, Brushed Dc equipment Motors, Planetary Dc Equipment Motors, Brushless Dc Motors, Stepper motors and Ac Motors and so forth. You can examine the requirements for earlier mentioned motors on our internet site and you can e-mail us to advise needed motors for each your specification way too.

Q:How to pick a suitable motor?
A:If you have motor images or drawings to present us, or you have detailed specs like voltage, speed, torque, motor measurement, doing work mode of the motor, required existence time and sounds degree etc, make sure you do not be reluctant to enable us know, then we can suggest suitable motor for every your ask for appropriately.

Q: Do you have custom-made service for your common motors?
A:Of course, we can customise per your ask for for the voltage, speed, torque and shaft dimensions/form. If you need to have added wires/cables soldered on the terminal or require to add connectors, or capacitors or EMC we can make it as well.

Q:Do you have person design support for motors?
A:Yes, we would like to design motors independently for our buyers, but it might want some CZPT cost and style cost. 

Q:Can I have samples for tests 1st?
A:Sure, absolutely you can. Following verified the needed motor specs, we will quote and provide a proforma bill for samples, as soon as we get the payment, we will get a PASS from our account department to proceed samples appropriately.

Q:How do you make certain motor good quality?
A:We have our own inspection procedures: for incoming resources, we have signed sample and drawing to make sure competent incoming supplies for manufacturing process, we have tour inspection in the process and closing inspection to make positive experienced items before shipping.

Q:What’s your direct time?
A:Normally speaking, our normal regular product will need twenty five-30days, a bit for a longer time for customized items. But we are really flexible on the direct time, it will is dependent on the specific orders

Q:What is actually your payment time period?
A:For all our new clients, we will want 40% deposite, sixty% compensated just before shipment.

Q:When will you reply after received my inquiries?
A:We will reaction inside 24 hrs once get your inquires.

Q:How can I trust you to make confident my money is risk-free?
A:We are certified by the 3rd social gathering SGS and we have exported to over 85 countries up to June.2017. You can check out our popularity with our recent clients in your nation (if our consumers do not head), or you can order through alibaba to get trade assurance from alibaba to make confident your cash is safe.

Q:What is the least get amount?
A:Our least get amount relies upon on various motor models, you should electronic mail us to check. Also, we normally do not take private use motor orders. 

Q:What’s your delivery technique for motors?
A:For samples and packages significantly less than 100kg, we typically suggest convey transport For weighty offers, we usually advise air shipping or sea shipping. But it all relies upon on our customers’ demands.

Q:What certifications do you have?
A:We presently have CE and ROSH certifications.

Q:Can you ship me your value checklist?
A:Because we have hundreds of distinct goods, and price varies for every various requirements, we are not CZPT to offer you a price checklist. But we can estimate inside of 24 several hours when got your inquirues to make certain you can get the price tag in time.

Q:Can I visit your business?
A:Yes, welcome to go to our business, but please permit us know at the very least 2 months in advance to aid us make positive no other conferences throughout the day you visit us.

 

Thanks!

Make contact with Us

HangZhou CZPT Co.,Ltd
Get in touch with Individual: Celia Chen

 
 
 

 
 

 

Any e mail or trademanager inquires will be replied in 24 several hours.

Standard samples can be provide quite swiftly(inside of ten days)

Custom-made provider for variety of motor accoring to your requirement

Professional Tchnical help and Right after-sale support

Sourcing motor parts like gears, encoders, cables, connectors and so on
 

 

 

 

 

Application: Universal, Industrial, Household Appliances, Power Tools, Robot, Toys, Door Lock, Monitor
Operating Speed: Low Speed
Function: Driving
Casing Protection: Closed Type
Structure and Working Principle: Brush
Certification: ISO9001, CCC, Ce, RoHS

###

Samples:
US$ 28/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Application: Universal, Industrial, Household Appliances, Power Tools, Robot, Toys, Door Lock, Monitor
Operating Speed: Low Speed
Function: Driving
Casing Protection: Closed Type
Structure and Working Principle: Brush
Certification: ISO9001, CCC, Ce, RoHS

###

Samples:
US$ 28/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

Benefits of a Planetary Motor

If you’re looking for an affordable way to power a machine, consider purchasing a Planetary Motor. These units are designed to provide a massive range of gear reductions, and are capable of generating much higher torques and torque density than other types of drive systems. This article will explain why you should consider purchasing one for your needs. And we’ll also discuss the differences between a planetary and spur gear system, as well as how you can benefit from them.

planetary gears

Planetary gears in a motor are used to reduce the speed of rotation of the armature 8. The reduction ratio is determined by the structure of the planetary gear device. The output shaft 5 rotates through the device with the assistance of the ring gear 4. The ring gear 4 engages with the pinion 3 once the shaft is rotated to the engagement position. The transmission of rotational torque from the ring gear to the armature causes the motor to start.
The axial end surface of a planetary gear device has two circular grooves 21. The depressed portion is used to retain lubricant. This lubricant prevents foreign particles from entering the planetary gear space. This feature enables the planetary gear device to be compact and lightweight. The cylindrical portion also minimizes the mass inertia. In this way, the planetary gear device can be a good choice for a motor with limited space.
Because of their compact footprint, planetary gears are great for reducing heat. In addition, this design allows them to be cooled. If you need high speeds and sustained performance, you may want to consider using lubricants. The lubricants present a cooling effect and reduce noise and vibration. If you want to maximize the efficiency of your motor, invest in a planetary gear hub drivetrain.
The planetary gear head has an internal sun gear that drives the multiple outer gears. These gears mesh together with the outer ring that is fixed to the motor housing. In industrial applications, planetary gears are used with an increasing number of teeth. This distribution of power ensures higher efficiency and transmittable torque. There are many advantages of using a planetary gear motor. These advantages include:
Motor

planetary gearboxes

A planetary gearbox is a type of drivetrain in which the input and output shafts are connected with a planetary structure. A planetary gearset can have three main components: an input gear, a planetary output gear, and a stationary position. Different gears can be used to change the transmission ratios. The planetary structure arrangement gives the planetary gearset high rigidity and minimizes backlash. This high rigidity is crucial for quick start-stop cycles and rotational direction.
Planetary gears need to be lubricated regularly to prevent wear and tear. In addition, transmissions must be serviced regularly, which can include fluid changes. The gears in a planetary gearbox will wear out with time, and any problems should be repaired immediately. However, if the gears are damaged, or if they are faulty, a planetary gearbox manufacturer will repair it for free.
A planetary gearbox is typically a 2-speed design, but professional manufacturers can provide triple and single-speed sets. Planetary gearboxes are also compatible with hydraulic, electromagnetic, and dynamic braking systems. The first step to designing a planetary gearbox is defining your application and the desired outcome. Famous constructors use a consultative modeling approach, starting each project by studying machine torque and operating conditions.
As the planetary gearbox is a compact design, space is limited. Therefore, bearings need to be selected carefully. The compact needle roller bearings are the most common option, but they cannot tolerate large axial forces. Those that can handle high axial forces, such as worm gears, should opt for tapered roller bearings. So, what are the advantages and disadvantages of a helical gearbox?

planetary gear motors

When we think of planetary gear motors, we tend to think of large and powerful machines, but in fact, there are many smaller, more inexpensive versions of the same machine. These motors are often made of plastic, and can be as small as six millimeters in diameter. Unlike their larger counterparts, they have only one gear in the transmission, and are made with a small diameter and small number of teeth.
They are similar to the solar system, with the planets rotating around a sun gear. The planet pinions mesh with the ring gear inside the sun gear. All of these gears are connected by a planetary carrier, which is the output shaft of the gearbox. The ring gear and planetary carrier assembly are attached to each other through a series of joints. When power is applied to any of these members, the entire assembly will rotate.
Compared to other configurations, planetary gearmotors are more complicated. Their construction consists of a sun gear centered in the center and several smaller gears that mesh with the central sun gear. These gears are enclosed in a larger internal tooth gear. This design allows them to handle larger loads than conventional gear motors, as the load is distributed among several gears. This type of motor is typically more expensive than other configurations, but can withstand the higher-load requirements of some machines.
Because they are cylindrical in shape, planetary gear motors are incredibly versatile. They can be used in various applications, including automatic transmissions. They are also used in applications where high-precision and speed are necessary. Furthermore, the planetary gear motor is robust and is characterized by low vibrations. The advantages of using a planetary gear motor are vast and include:
Motor

planetary gears vs spur gears

A planetary motor uses multiple teeth to share the load of rotating parts. This gives planetary gears high stiffness and low backlash – often as low as one or two arc minutes. These characteristics are important for applications that undergo frequent start-stop cycles or rotational direction changes. This article discusses the benefits of planetary gears and how they differ from spur gears. You can watch the animation below for a clearer understanding of how they operate and how they differ from spur gears.
Planetary gears move in a periodic manner, with a relatively small meshing frequency. As the meshing frequency increases, the amplitude of the frequency also increases. The amplitude of this frequency is small at low clearance values, and increases dramatically at higher clearance levels. The amplitude of the frequency is higher when the clearance reaches 0.2-0.6. The amplitude increases rapidly, whereas wear increases slowly after the initial 0.2-0.6-inch-wide clearance.
In high-speed, high-torque applications, a planetary motor is more effective. It has multiple contact points for greater torque and higher speed. If you are not sure which type to choose, you can consult with an expert and design a custom gear. If you are unsure of what type of motor you need, contact Twirl Motor and ask for help choosing the right one for your application.
A planetary gear arrangement offers a number of advantages over traditional fixed-axis gear system designs. The compact size allows for lower loss of effectiveness, and the more planets in the gear system enhances the torque density and capacity. Another benefit of a planetary gear system is that it is much stronger and more durable than its spur-gear counterpart. Combined with its many advantages, a planetary gear arrangement offers a superior solution to your shifting needs.
Motor

planetary gearboxes as a compact alternative to pinion-and-gear reducers

While traditional pinion-and-gear reducer design is bulky and complex, planetary gearboxes are compact and flexible. They are suitable for many applications, especially where space and weight are issues, as well as torque and speed reduction. However, understanding their mechanism and working isn’t as simple as it sounds, so here are some of the key benefits of planetary gearing.
Planetary gearboxes work by using two planetary gears that rotate around their own axes. The sun gear is used as the input, while the planetary gears are connected via a casing. The ratio of these gears is -Ns/Np, with 24 teeth in the sun gear and -3/2 on the planet gear.
Unlike traditional pinion-and-gear reducer designs, planetary gearboxes are much smaller and less expensive. A planetary gearbox is about 50% smaller and weighs less than a pinion-and-gear reducer. The smaller gear floats on top of three large gears, minimizing the effects of vibration and ensuring consistent transmission over time.
Planetary gearboxes are a good alternative to pinion-and-gear drive systems because they are smaller, less complex and offer a higher reduction ratio. Their meshing arrangement is similar to the Milky Way, with the sun gear in the middle and two or more outer gears. They are connected by a carrier that sets their spacing and incorporates an output shaft.
Compared to pinion-and-gear reduces, planetary gearboxes offer higher speed reduction and torque capacity. As a result, planetary gearboxes are small and compact and are often preferred for space-constrained applications. But what about the high torque transfer? If you’re looking for a compact alt

China 32mm 80 Rpm Brushed DC Planetary 12V Gear Motor 25kg     manufacturer China 32mm 80 Rpm Brushed DC Planetary 12V Gear Motor 25kg     manufacturer
editor by czh 2023-01-08